5.
Install the inner (1) and outer (2) hydraulic fluid tubes.
6.
Align the bolt holes in each seal cover (2) and install
the four bolts (1) which secure the seal cover to the
C-frame. Torque the bolts to 16 - 19 N·m (12 - 14 ft.
lbs.).
NOTE: Step 7 is for wheel motors with serial numbers
23327 or above.
7.
Grease and install the top pin into the C-frame and
wheel motor. Using LocTite 271 on the bolt threads,
install the 5 bolts (1) which secure the top pin to the
C-frame. Torque the bolts to 69 - 75 N·m (50 - 55 ft.
lbs.).
TRAVELLING - 2WD-4WD SYSTEM Hydrostatic
2 4/7/2006
D.14.E / 64
4
20015309
5
20016108_1025
6
20015308