4.
Install needle bearings (1).
5.
Install gear (2).
Install washer (3) and heat bearing (4) to 80 °C (176
°F) and install it on the drive shaft.
6.
Install washer (3).
Install lockwasher (2).
Install nut (1) and tighten it to a torque of 150-170
N·m (111-125 ft.lbs.).
Secure nut (1) by bending a lip of the lockwasher in
one of the notches of the nut.
POWER TRAIN - TRANSMISSION Mechanical
2 4/7/2006
C.20.B / 51
4
ZDA3398A
5
ZDA3506A
6
ZDA3396A