Final drive Output shaft - Assemble (D.10.A.42.45 - F.10.A.20)
CX860, CX880
1.
Heat the bearing (2) to 80 °C (176 °F) and install it
on the output shaft (1).
IMPORTANT: Be sure the inner ring of the bearing (2) is
pushed as far as possible on the output shaft.
2.
Install the wheel bolts (3).
3.
NOTE: In case mud seals are installed, take care not to
damage the ring (4).
TRAVELLING - FRONT AXLE
2 4/7/2006
D.10.A / 51
1
ZDA4631A
2
ZDA4631B
3
ZDA4632A