24.
Turn an M12 cap screw into the end of the unloading
shaft. Measure the rolling torque of the shaft without
the brake installed.
25.
Turn out the four attaching cap screws (1). Tighten
the jacking screws (2), to lift the cover from the gear-
box.
26.
Secure the unloading clutch brake (1) to the cover
with four cap screws (2).
POWER TRAIN - PROCESS DRIVE Primary process drive
2 4/7/2006
C.50.B / 39
24
10006353
25
10013326_922
26
10006354_921