7.
Remove the threaded sensor (1) from the gearbox.
IMPORTANT: DO NOT lose the shim washers. The wash-
ers will be required upon reassembly to maintain minimum
acceptable clearance.
8.
Lift the main clutch shaft (1) out of the gearbox.
NOTE: The unload clutch shaft and main clutch shaft are
heavy. Exercise care when removing the units from the
gearbox.
9.
Lift the unload clutch shaft (1) out of the gearbox.
POWER TRAIN - PROCESS DRIVE Primary process drive
2 4/7/2006
C.50.B / 7
7
10004283_913
8
10004284
9
10004285