New Holland CX720 Repair Manual page 2533

4. Plug electrical connector (1) into the case drain line
elbow. Plug in the solenoid connector (2). Turn in
the screw at the top of the connector to secure it in
place.
5. Lubricate and install o-rings into the ends of the main
hydraulic lines (1). Attach the lines to the motor us-
ing four cap screws for each fitting. Torque the cap
screws to 104 N·m (77 ft. lbs.).
Prepare the system for operation in accordance with
TRANSMISSION Hydrostatic - Filling (C.20.F -
F.60.A.10).
POWER TRAIN - TRANSMISSION Hydrostatic
2 4/7/2006
C.20.F / 81
4
10013279
5
10013278