New Holland CX720 Repair Manual page 2491

Motor - Component identification (C.20.F.28 - C.40.C.20)
Each motor has a name plate attached to the housing. The name plate will include the model number, model code
and serial number.
Model Code A
The Sauer Danfoss model code defines the specific build configuration of each unit and must be used when ordering
spare parts or a new motor.
Model Number B
The Sauer Danfoss model number is used by the factory in manufacturing. A new unit can be ordered by the model
number.
Serial Number C
The Sauer Danfoss serial number identifies the location and date of manufacture and the unit sequence in the build.
The letter coding indicates the location of original assembly "A" indicates assembly in Ames, Iowa, USA "N" indicates
assembly in Neumunster, Germany.
The first number (two digits) indicates the year of manufacture. For example, a unit built in 2001 would have the
number "01" in this space.
The second number (two digits) indicates the calendar week of manufacture, from week 1 to week 52.
The third number (five digits) is the sequential build number identifying the specific unit.
POWER TRAIN - TRANSMISSION Hydrostatic
BSC1348A
Motor Identification Name Plate
2 4/7/2006
C.20.F / 39
1