4.
Remove the extension (1) from the combine. Push
the ladder and platform toward the combine.
Secure the shield to the platform using the previously
removed hardware.
5.
Secure the platform to the combine using cap
screws, washers and nuts at (1).
6.
Move clamp (1) to another set of mounting holes as
required, to ensure that two clamps are holding the
slide tube.
Tighten platform slide tube clamps (1) and (2).
BODY AND STRUCTURE - OPERATOR AND SERVICE PLATFORM
2 4/7/2006
E.30.A / 4
4
20015791
5
20015792
6
20015788_1507