Water pump - Replace (B.50.A.20 - F.10.A.30)
CX860, CX880
Handle all parts carefully. Do not put your hands or fingers between parts. Always wear suitable safety items
such as fitted clothing, safety goggles, gloves, shoes, etc. M954
1.
Drain off the coolant from the engine cooling system.
Using a suitable tool (3) turn in the direction of the
arrow on the tightener (2) and remove the drive belt
(1).
Take out the fixing screws and remove the water
pump (5).
For refitting, reverse the removal operations, fitting
a new ring seal on the water pump and tightening
the fixing screws to the required torque. On comple-
tion, fill the cooling system with the required type and
amount of coolant.
POWER PRODUCTION - ENGINE COOLANT SYSTEM
CAUTION
2 4/7/2006
B.50.A / 28
1
MID0525A