Final drive Wheel stud - Replace (D.10.A.42.60 - F.10.A.30)
CX860, CX880
1.
Remove the traction wheel.
Install a suitable and safe support underneath the com-
bine traction axle to support the combine. Z016
2.
Remove sleeve (1) at the planetary final drive.
3.
Turn the output shaft of the planetary final drive until
wheel bolt (2) (the bolt to be replaced) is in front of
maintenance plug (1).
Remove maintenance plug (1).
Drive out wheel bolt (2).
Insert new wheel bolt (2) and pull it on its place with
a wheel nut.
NOTE: Make sure the notch on the wheel bolt is in line with
the step on the output shaft.
4.
Reinstall maintenance plug (1).
TRAVELLING - FRONT AXLE
CAUTION
2 4/7/2006
D.10.A / 72
1
ZDA4705A
2
ZDA4662A