New Holland CX720 Repair Manual page 2643

10. Support the unload clutch shaft (1) vertically with the
tapered end down.
Slide the clutch assembly (2) onto the shaft.
Press the spur gear inner bearing (3) onto the clutch
shaft with the tapered end up.
11. Set the spacer ring (1) onto the spur gear inner bear-
ing.
12. Slide the spur gear assembly over the clutch until the
inner race of the spur gear is seated on the inner
bearing.
Press the spur gear outer bearing (2) and the clutch
shaft bearing (3), onto the shaft assembly.
POWER TRAIN - PROCESS DRIVE Primary process drive
2 4/7/2006
C.50.B / 79
10
10005494
11
10005495
12
10005496