BODY AND STRUCTURE - ENVIRONMENT CONTROL Air-conditioning system
Expansion valve - Install (E.40.C.34 - F.10.A.15)
1.
Set the thermal expansion valve into position and
secure it with two cap screws (1) Apply refrigerant oil
to the O rings and connect the four refrigerant lines
(2).
Wrap the valve and attached lines with insulation.
Recharge the refrigerant system in accordance with
the Recharge/Refilling procedure in this section.
2.
Set the ventilation system shield into place and se-
cure using five cap screws (1).
2 4/7/2006
E.40.C / 65
1
10008352_1091
2
10008343_1089