New Holland CX720 Repair Manual page 2318

N° Test Point
4 Ignition Switch in "OFF" position.
Measure resistance from Neutral
Start Relay (pin 2) to ground.
5 Ignition Switch in "START" position.
Measure for 12 volts at Neutral Start
Relay (pin 5).
POWER PRODUCTION - STARTING SYSTEM
Expected Result
Less than 1 ohm.
If good reading, go to next test point.
12 volts.
If good reading, Neutral Start Relay
operating properly.
2 4/7/2006
B.80.A / 10
Other Result (Possible Cause)
Open in circuit 094 (BK) between
Neutral Start Relay (pin 2) and
ground.
Neutral Start Relay