New Holland CX720 Repair Manual page 1886

4. When the timing pin is located in the slot of the crank-
shaft the pin is fully seated.
Do Not attempt to rotate the crankshaft when timing
pin is fully inserted as damage will occur.
5. With the pump on the bench, rotate the injec-
tion pump clockwise until the threaded hole in the
pump drive flange aligns with the pump timing
plate. Screw the injection pump timing pin 295005
(NA-FNH00536-1) into the pump.
6. Refit pump onto engine and tighten the four retaining
nuts to a torque of 27-34 N·m (20-25 lbf.ft).
POWER PRODUCTION - FUEL AND INJECTION SYSTEM
2 4/7/2006
B.20.A / 56
4
BSC1305A_828
5
P396-E-48_829
6
BSD1847A_822