11.
If pump timing is incorrect and timing pin can not be
screwed into pump, remove pump timing gear, install
rigid timing pin 295005 (NA-FNH00536-1) into pump
and refit timing gear.
NOTE: This injection pump timing check assumes that the
crankshaft and camshaft timing gears were correctly posi-
tioned during engine assembly. To check the position of
these timing gears it is necessary to remove the engine
front cover.
POWER PRODUCTION - FUEL AND INJECTION SYSTEM
2 4/7/2006
B.20.A / 62
10
P396-E-48