New Holland CX720 Repair Manual page 1905

Fuel injector - Install (B.20.A.29 - F.10.A.15)
CX860, CX880
1. Refitting
Thoroughly clean the pump-injector seat and the
pump-injectors.
Fit the ring seals (1) (2) and (3), onto the injectors.
2. Mount the injectors and, using a torque wrench (2)
lock the screws fixing the injector brackets (1) to
the required torque. Screw down the screws for the
electrical connections (4) locking them with a torque
screwdriver (3) to a torque of 1.36 — 1.92 N·m (0.136
— 0.192 kgm [12-17 in. lbs.]).
- Position the intake and exhaust valve crosspieces.
NOTE: Position the crosspieces on the valve stem, all with
the largest hole on the same side.
POWER PRODUCTION - FUEL AND INJECTION SYSTEM
2 4/7/2006
B.20.A / 75
1
MID0517A
2
MID0518A