New Holland CX720 Repair Manual page 1778

Cylinder block - Overhaul (B.10.A.70 - F.10.A.40)
CX860, CX880
1.
Handle all parts carefully. Do not put your hands or fin-
gers between parts. Always wear suitable safety items
such as fitted clothing, safety goggles, gloves, shoes,
etc. M954
NOTE: Check the inside diameter of the cylinder liners to
verify the extent of ovalization, taper and wear with the
gauge, 2, equipped with a dial gauge, 1, previously zeroed
on the ring gauge, 3: -- 296194 of diameter 115 mm (4.528)
(F2B engine); -- 296195 of diameter 125 mm (4.921) (F3A
engine). If the ring gauge is not available, use a microme-
ter.
2. Outline for checking the diameter of the cylinder lin-
ers (dimensions in mm)
1. 1st measurement
2. 2nd measurement
3. 3rd measurement.
The measurements have to be made on each single
cylinder liner at three different heights and on two
planes (A-B) at right angles to each other, as shown
in Fig.2
POWER PRODUCTION - ENGINE
CAUTION
3
MID0385A
2 4/7/2006
B.10.A / 232
1
MID0383A
2
MID0384A