New Holland CX720 Repair Manual page 1749

2 nd phase
3 rd phase
9. FITTING CAMSHAFT
Mount the camshaft (4) arranging it with the holes
(→) positioned as in Fig. 10
Lubricate the ring seal (3), and fit it on the shoulder
plate (2).
Mount the shoulder plate,(3), with the sheet metal
gasket,(1), and tighten the screws (5), to the required
torque.
10. Apply the gauge (1):
296207, for the F2B engine;
296209, for the F3A engine.
Check and adjust the position of the connecting rod
(3) for the transmission gear, lock the screw (2) to the
required torque.
POWER PRODUCTION - ENGINE
F2B
60 °
-
9
MID0347A
60 °
30 °
2 4/7/2006
B.10.A / 203
F3A
MID0348A
MID0349A
10
11