7.
Check idler gear end float using similar procedure
described for the camshaft gear. If outside limits of
0.073-0.35 mm (0.003 in-0.014 in) fit a new idler
gear wear plate (1).
8.
To remove the fuel pump drive gear remove the 4
retaining bolts.
9.
If required the timing gear rear cover plate may now
be removed. Remove the six retaining bolts and
carefully pry the cover from the engine block. When
replacing the cover tighten retaining bolts to a torque
of 24 Nm (18 ft. lb.).
POWER PRODUCTION - ENGINE
2 4/7/2006
B.10.A / 195
7
396-E-46
8
396-E-36
9
1z0o2004112029