New Holland CX720 Repair Manual page 1743

4. If the pump has been removed during engine over-
haul refit pump onto engine.
5. Install timing gears ensuring the timing marks on the
crankshaft, idler and camshaft gears align.
Fit the pump drive gear and remove pump timing pin.
Torque bolts as follows.
Camshaft gear 69 Nm (51 lbf.ft)
Idler Gear 204-279 Nm (150-205 lb.ft )
Pump Drive Gear 38 N (28 lbf.ft).
6. Remove crankshaft timing pin and install plug.
POWER PRODUCTION - ENGINE
2 4/7/2006
B.10.A / 197
4
BSD1847A_761
5
P396-E-36_762
6
BSD1542B_763