Connecting rod and piston - Assemble (B.10.A.47 - F.10.A.20)
CX860, CX880
1.
Piston-connecting rod assembly
1. Connecting rod body
2. Half bearings
3. Connecting rod cap
4. Cap fixing screws
5. Split ring
6. Oil scraper ring with slots with spiral spring
7. Ring seal
8. Trapezoidal ring seal
9. Piston pin
10. Piston
2.
Connecting rod-piston coupling
NOTE: The piston, 1, has to be fitted on the connecting rod,
2, so that the symbol, 4, showing the assembly position in
the cylinder liner and the punch mark, 3, of the connecting
rod are observed as shown in the Fig.
POWER PRODUCTION - ENGINE
2 4/7/2006
B.10.A / 210
1
MID0438A
2
MID0439A