New Holland CX720 Repair Manual page 1745

Timing gear - Assemble (B.10.A.45 - F.10.A.20)
CX860, CX880
1. Fit the oil pump (4) intermediate gears (2) together
with connecting rod (1) and tighten the screws (3) in
two stages:
pre-torque 30 N·m (22 ft. lbs.)
closed angle 90 °
NOTE: The screws, 3, fixing the intermediate gear of the
F2B engine are treated with MOLYCOTE lubricant and re-
quire no lubrication whatsoever. They can be reused for up
to five disassemblies; replace them if in doubt. The screws,
,) fixing the intermediate gear of the F3A engine must, be-
fore assembly, be lubricated with engine oil.
2. Apply LOCTITE 5699 silicone on the gear box (2)
with an appropriate tool (1) as shown in the Fig.
Fit within 10 min. of applying the sealant. Z107
3. Tighten the fixing screws of the timing system box to
the torques indicated here and according to the given
sequence.
POWER PRODUCTION - ENGINE
CAUTION
2 4/7/2006
B.10.A / 199
1
MID0339A
2
MID0340A