F3A ENGINE
4.
Key the ring seal (1) onto the crankshaft, on which
you should apply the tool (2):
296167, for the F2B engine;
296169, for the F3A engine.
Screw down the nut (3) to mount the ring seal (1)
completely in the gear box (4).
POWER PRODUCTION - ENGINE
10 screws M12 x 1.75 x 100; 63 N·m (46 ft. lbs.)
2 screws M12 x 1.75 x 70; 63 N·m (46 ft. lbs.)
4 screws M12 x 1.75 x 35; 63 N·m (46 ft. lbs.)
1 screw M12 x 1.75 x 120; 63 N·m (46 ft. lbs.)
2 screws M12 x 1.75 x 193; 63 N·m (46 ft. lbs.)
B.10.A / 201
4
MID0342A
2 4/7/2006
5
MID0343A