Indicators; Technical Data; Product; Input - WAGO 2789-9080 Product Manual

Properties
Item Number
Connection Technology

3.6 Indicators

The product has a visual status indicator. This indicator consists of two LEDs.
Indicator
ERR
COM OK

3.7 Technical data

3.7.1 Product

Property
Width
Height
Depth
Weight
Degree of protection

3.7.2 Input

Property
Nominal input voltage
Input voltage range
Input current
Property
Cross-section
Strip length
14 Product manual | Version: 1.0.0
IO-Link Communication Module
COM OK
LED Description State
Error Off
On
Flashing (2 Hz)
Flashing (8 Hz)
Device status Off
On
Flashing (2 Hz)
Solid
Fine-stranded
Insulated ferrule with plastic collar
Ferrule without plastic collar
0721-0103/Z000-0020
Push-In CAGE CLAMP®
ERR
Figure 5: Visual Status Indicator
Table 3: Operating Status Indication
Description
Ready for operation; no error
General error/system error
IO‑Link connection error
Connection error to the lower-level device
No connection to lower-level device
Ready for operation
Communication active
Table 4: Technical Data – Product
Value
35 mm
80 mm / 95 mm (incl. connector/female connec-
tor)
22 mm / 28 mm (incl. latch)
35 g
IP20
Table 5: Technical Data – Input
Value
24 VDC SELV (via IO-Link master)
18 ... 30 VDC SELV (via IO-Link master)
≤ 15 mA
Table 6: Technical Data – Input Connection
Value
0.08 ... 2.5 mm² / 28 ... 12 AWG
0.08 ... 2.5 mm² / 28 ... 12 AWG
0.25 ... 1.5 mm² / 20 ... 16 AWG
0.25 ... 2.5 mm² / 20 ... 14 AWG
8 ... 9 mm / 0.31 ... 0.35 inch
2789-9080