Description Of The Call Options; Indirect Start Via Wago-I/O-Check From The Operating System - WAGO -I/O-SYSTEM 750 Series Manual

WAGO-I/O-SYSTEM 750
753-661/000-003 4FDI 24V PROFIsafe V2 iPar
To load a parameter file saved on the PC for comparison, click the [Open] button
and select whether the data set should appear in the Reference or Comparison
column.
To return the comparison dialog to its original state, click the [Delete] button.
To print the results of the comparison between to data sets, click the [Print]
button.
To exit the Safety Editor comparison dialog, click the [Close] button.
To close the Safety Editor, click on [Exit] in the Safety Editor toolbar.
Pos: 48.2 /Serie 750 (WAGO-I/O-SYSTEM)/In Betrieb nehmen/Parametrieren mit WAGO-I/O-CHECK/Parametrieren 750-66x/Aufrufvarianten 75x-066x/000-003 @ 6\mod_1260793680382_21.docx @ 47081 @ 344444444 @ 1
8.3.3

Description of the Call Options

The WAGO-Safety-Editor 75x 2.x can be started with different call options.
Depending on the call option, the Safety Editor is started in either ONLINE or
OFFLINE mode.
In ONLINE mode, different communication media are available (serial
connection/ TCP/IP connection, fieldbus connection).
Do not change the selected PROFIsafe I/O module or communication
connection if an application is open!
Changing the PROFIsafe I/O module to be parameterized or communication
connection is currently not possible at runtime of the Safety Editor. If you want to
parameterize a different PROFIsafe I/O module or you want to change the
communication connection, close and restart the Safety Editor.
Instances of the Safety Editor
In ONLINE mode, only one instance of the Safety Editor can be open. In
OFFLINE mode, as many instances of the Safety Editor as you want can be open.
8.3.3.1

Indirect Start via WAGO-I/O-CHECK from the Operating System

In the Windows Start menu, select the entry Programs  WAGO-Software 
WAGO-I/O-CHECK  WAGO-I/O-CHECK 3.
Select a PROFIsafe I/O module for parameterization from the displayed fieldbus
node configuration. Execute the Settings command in the WAGO-I/O-CHECK in
the context menu of the I/O module (node view or navigation). WAGO-I/O-
CHECK then starts WAGO Safety Editor 75x with the current language and
communication setting. The Safety Editor is started in ONLINE mode.
Manual
Version 1.4.0, valid from HW/SW Version 01/02
Commissioning 77