Pos: 24.58 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Technische Daten/Sonstige/PROFIsafe Transport- und Lagerbedingungen @ 7\mod_1268824364076_21.docx @ 53055 @ 3 @ 1

4.8.1

Transport and Storage Conditions

During transport and storage, the PROFIsafe I/O modules must be protected

against undue stress such as mechanical loads, temperature, humidity and

aggressive atmospheres.

The PROFIsafe I/O modules should be stored in the original packaging when

possible, which offers optimal protection during transport.

When picking or unpacking, do not contaminate or damage the contacts. The

PROFIsafe I/O modules must be stored and transported in suitable

containers/packaging in compliance with the ESD instructions. The devices

contain components sensitive to static discharge and can be damaged by improper

handling.

Therefore, when transporting open modules, use statically shielded transport bags

with metal coating to prevent contamination from amines, amides and silicones

such as 3M 1900E.

In addition, take the required protective measures against electrostatic discharge

(ESD) during startup and maintenance of the PROFIsafe I/O modules.

Pos: 24.59 /Serie 750 (WAGO-I/O-SYSTEM)/Wichtige Erläuterungen/Sicherheits- und sonstige Hinweise/Achtung/Achtung: ESD - Auf gute Erdung der Umgebung achten! @ 7\mod_1266318538667_21.docx @ 50708 @ @ 1

Ensure that the environment is well grounded!

The devices are equipped with electronic components that may be destroyed by

electrostatic discharge. When handling the devices, ensure that the environment

(persons, workplace and packing) is well grounded. Avoid touching conductive

components, e.g. data contacts.

Pos: 25 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

Manual

Version 1.4.0, valid from HW/SW Version 01/02

Device Description

Table of Contents