WAGO -I/O-SYSTEM 750 Series Manual page 21

WAGO-I/O-SYSTEM 750
753-661/000-003 4FDI 24V PROFIsafe V2 iPar
Pos: 24.1.4 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Einleitung/I/O-Beschreibung/Allgemein/Verweis auf Kapitel "Anschlüsse" @ 8\mod_1276775378035_21.docx @ 57956 @ @ 1
The assignment of the connections is described in the "Connectors" section.
Pos: 24.1.5 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Einleitung/I/O-Beschreibung/Allgemein/Verweis auf Kapitel "Geräte anschließen" > "Anschlussbeispiel(e)" @ 5\mod_1246015203281_21.docx @ 36298 @ @ 1
Connection examples are shown in section "Connecting Devices" > ... >
"Connection Example(s)".
Pos: 24.1.6 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Einleitung/LED-Anzeige/LED Zustand Signal Fehler PROFIsafe FDI FDO @ 4\mod_1240233303921_21.docx @ 30843 @ @ 1
Multicolor LEDs indicate the signal states of the inputs and outputs, as well as the
status and errors of the PROFIsafe I/O module.
Pos: 24.1.7 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Einleitung/LED-Anzeige/Verweis auf Kapitel "Anzeigeelemente" @ 5\mod_1246010525000_21.docx @ 36194 @ @ 1
The meaning of the LEDs is described in the "Display Elements" section.
Pos: 24.1.8 /Serie 750 (WAGO-I/O-SYSTEM)/Wichtige Erläuterungen/Sicherheits- und sonstige Hinweise/Hinweis/Hinweis: PROFIsafe Einspeisekonzept beachten @ 7\mod_1265283290674_21.docx @ 49728 @ @ 1
Observe the information on the power supply concept!
Detailed information and examples for supplying PROFIsafe I/O modules is
available in the section "Connecting Devices" > ... > "Power Supply Concept".
Pos: 24.1.9 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Einleitung/Versorgung/Versorgung 24 V, 0 V über Leistungskontakte Standard @ 3\mod_1226498974531_21.docx @ 25020 @ @ 1
The I/O module 753-661/000-003 (4FDI 24V PROFIsafe V2 iPar) receives the
24 V voltage supply for the field level from an upstream I/O module or from the
fieldbus coupler/controller via blade-formed power jumper contacts. It then
provides these potentials to subsequent I/O modules via spring-formed power
jumper contacts.
Pos: 24.1.10 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Einleitung/Versorgung/Galvanische Trennung Feld/System @ 3\mod_1233756478750_21.docx @ 27102 @ @ 1
The field voltage and the system voltage are electrically isolated from each other.
Pos: 24.1.11 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Einleitung/Versorgung/Anordnung unter Berücksichtigung der Leistungskontakte beliebig @ 3\mod_1233756233468_21.docx @ 27099 @ @ 1
With consideration of the power jumper contacts, the individual modules can be
arranged in any combination when configuring the fieldbus node. An arrangement
in groups within the group of potentials is not necessary.
Pos: 24.1.12 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Einleitung/Einsatzbereich/Einsatzbereich 75x-066x/000-003 @ 23\mod_1437391184128_21.docx @ 186490 @ @ 1
The PROFIsafe I/O module 753-661/000-003 can be operated on the
WAGO-I/O-SYSTEM 750 fieldbus couplers specified in section "Technical
Data" > ... > "Communication":
Pos: 24.2 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
Manual
Version 1.4.0, valid from HW/SW Version 01/02
Device Description 21