WAGO-I/O-SYSTEM 750
753-661/000-003 4FDI 24V PROFIsafe V2 iPar
Figure 27: Infeed for PROFIsafe I/O Modules 750-66x and 753-66x
Do not exceed maximum current via power contacts!
The maximum current that can flow through the power jumper contacts is 10 A.
The power jumper contacts can be damaged when the maximum is exceeded.
When configuring the system, do not exceed this current. If that is the case, you
must use an additional supply module.
Pos: 36.2 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
Manual
Version 1.4.0, valid from HW/SW Version 01/02
Connect Devices
59