WAGO -I/O-SYSTEM 750 Series Manual page 19

WAGO-I/O-SYSTEM 750
753-661/000-003 4FDI 24V PROFIsafe V2 iPar
function block or as a system function within the non-safety related part of the
safe PLC.
Further details about using the iPar server in conjunction with the WAGO
PROFIsafe I/O modules are available in an application note.
Use the application notes from WAGO!
An overview for using the PROFIsafe I/O module in combination with a safe PLC
is summarized in an application note. This application note is available on the
Internet at www.wago.com under "Service > Downloads > Application Notes ..."
Pos: 22 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
Manual
Version 1.4.0, valid from HW/SW Version 01/02
PROFIsafe 19