Coding; Figure 19: Assembling The Coding Fingers; Figure 20: Inserting The Coding Fingers; Figure 21: Plugging The Connector Into Place - WAGO -I/O-SYSTEM 750 Series Manual
4fdi 24v profisafe v2 ipar safety 4-channel digital input module profisafe v2
Hide thumbs
Also See for WAGO-I/O-SYSTEM 750 Series:
Table of Contents
Advertisement
54
Mounting
Pos: 30.14 /Serie 753 (WAGO-I/O-SYSTEM)/Montieren/Kodierung der Stecker Serie 753 @ 4\mod_1240393983875_21.docx @ 31217 @ 3 @ 1
6.3.1
Coding
Coding using small plastic pins and sockets facilitates mating of the module with
the appropriate connector.
1.
Insert the pin into the socket.
Figure 19: Assembling the Coding Fingers
2.
Position the assembled coding fingers in the I/O module. Due to its design,
each coding finger allows four different coding options (i.e.; 16 different
options using two coding fingers).
Figure 20: Inserting the Coding Fingers
3.
Place the connector onto the I/O module.
Figure 21: Plugging the Connector into Place
WAGO-I/O-SYSTEM 750
753-661/000-003 4FDI 24V PROFIsafe V2 iPar
Version 1.4.0, valid from HW/SW Version 01/02
Manual
Advertisement
Chapters
Table of Contents
