Cage Clamp; Figure 7: Cage Clamp ® Connectors; Table 6: Legend For Figure "Cage Clamp ® Connectors - WAGO -I/O-SYSTEM 750 Series Manual

26 Device Description
Pos: 24.15 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Anschlüsse/CAGE CLAMP-Anschlüsse - Überschrift 3 @ 6\mod_1256296337770_21.docx @ 43674 @ 3 @ 1
4.2.3

CAGE CLAMP

Pos: 24.16 /Serie 753 (WAGO-I/O-SYSTEM)/Hinweise zur Dokumentation/Hinweis zum Zubehörteil 753-120 (PROFIsafe) @ 20\mod_1411713230395_21.docx @ 164884 @ @ 1
Depiction of the I/O module with 753-120 Connector!
Information on this pluggable connection pertains to the 753-120 Connector,
which is not included with the I/O module.
Pos: 24.17 /Serie 753 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Anschlüsse/Sonderklemmen/CC-Anschlüsse 753-0661 @ 4\mod_1243589409531_21.docx @ 34445 @ @ 1
Figure 7: CAGE CLAMP
Table 6: Legend for Figure "CAGE CLAMP
Channel
1
2
3
4
1
2
3
4
Pos: 24.18 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
®
Connectors
®
Connectors
®
Connectors"
Designation
Clock output T1
Clock output T2
Clock output T1
Clock output T2
Input I1
Input I2
Input I3
Input I4
Version 1.4.0, valid from HW/SW Version 01/02
WAGO-I/O-SYSTEM 750
753-661/000-003 4FDI 24V PROFIsafe V2 iPar
Connector Function
1 Input I1: Clock output
2 Input I2: Clock output
3 Input I3: Clock output
4 Input I4: Clock output
5 Input I1: Signal voltage
6 Input I2: Signal voltage
7 Input I3: Signal voltage
8 Input I4: Signal voltage
Manual