Communication; Table 11: Technical Data, Communication - WAGO -I/O-SYSTEM 750 Series Manual
4fdi 24v profisafe v2 ipar safety 4-channel digital input module profisafe v2
Hide thumbs
Also See for WAGO-I/O-SYSTEM 750 Series:
Table of Contents
Advertisement
WAGO-I/O-SYSTEM 750
753-661/000-003 4FDI 24V PROFIsafe V2 iPar
4.6.3
Communication
Table 11: Technical Data, Communication
Usable fieldbus couplers / controllers
GSD specification
No. of PROFIsafe I/O modules per node
(fieldbus couplers / controllers)
PROFIsafe
F Parameter
Channel diagnostic messages
Acknowledgement path F_Ack
Manual
Version 1.4.0, valid from HW/SW Version 01/02
max.
F_Check_SeqNr
F_iPar_CRC
F_Block_ID
F_SIL
F_CRC_Length
F_Par_Version
F_Dest_Addr
F_WD_Time
Device Description
750-333 SW 14, HW 16 or higher
750-370 SW 02, HW 01 or higher
750-375 SW 02, HW 01 or higher
750-377 SW 02, HW 01 or higher
V5
See information in handbook about the
respective fieldbus coupler/controller
No Check/Check
(depending on PLC)
0 ... 65535
0 / 1 for 750-333 and 750-370
1
for 750-375 and 750-377
SIL3
2 Byte (PROFIsafe V1) /
3 Byte (PROFIsafe V2)
PROFIsafe V1/PROFIsafe V2
1 ... 65534
50 ms ... 10000 ms
Can be switched on/off for entire
PROFIsafe I/O module
Available in software version 08 and
higher
33
Advertisement
Chapters
Table of Contents
