WAGO -I/O-SYSTEM 750 Series Manual page 69

WAGO-I/O-SYSTEM 750
753-661/000-003 4FDI 24V PROFIsafe V2 iPar
The process image of the digital inputs now contains the switch setting of the
mode selector switch.
A suitable module must be used in the safety application of the safe PLC to
analyze the input bits. Details about a suitable module are available in an
application note.
Use the application notes from WAGO!
An overview for using PROFIsafe I/O modules in combination with a safe PLC is
summarized in an application note. This application note is available on the
Internet at
Notes...".
Pos: 41 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
Manual
Version 1.4.0, valid from HW/SW Version 01/02
www.wago.com in the area "Service > Documentation > Application
Connect Devices 69