WAGO -I/O-SYSTEM 750 Series Manual page 125
4fdi 24v profisafe v2 ipar safety 4-channel digital input module profisafe v2
Hide thumbs
Also See for WAGO-I/O-SYSTEM 750 Series:
Table of Contents
Advertisement
WAGO-I/O-SYSTEM 750
753-661/000-003 4FDI 24V PROFIsafe V2 iPar
Table 42: PROFIsafe F Parameters
F Parameters
F_iPar_CRC
Pos: 62 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
Manual
Version 1.4.0, valid from HW/SW Version 01/02
Default Value Description
<v>T - 103
The F_iPar_CRC is only available when
F_iPar_CRC</
F_Block_ID = 1 and specifies a comparison
v>
value for the CRC value via the individual
Parameter (iPar_CRC). The PROFIsafe data
exchange only starts when the values for
F_iPar_CRC and der iPar_CRC match. If they
differ, the PROFIsafe I/O module makes a
restore request of the individual Parameter
from the iPar server.
The F_iPar_CRC value 0 holds special
standing. This value switches the PROFIbus
I/O module into test mode.
The CRC value (iPar CRC) is displayed by the
WAGO parameterization tool and must be
transferred with the configuration tool of the
safe PLC to the F parameter of the PROFIsafe
I/O module.
Appendix
125
Advertisement
Chapters
Table of Contents
