Coding; Figure 11: Attachment Of Cable Binders; Figure 12: Assembling The Coding Fingers; Figure 13: Inserting The Coding Fingers - WAGO -I/O-SYSTEM 750 Manual

36 Mounting

Figure 11: Attachment of Cable Binders

5.3.1

Coding

Coding using small plastic pins and sockets facilitates mating of the I/O module
with the appropriate plug.
1. Insert the pin into the socket.

Figure 12: Assembling the Coding Fingers

2. Position the assembled coding fingers in the I/O module. Due to its design,
each coding finger allows 4 different coding options (i.e.; 16 different
options using 2 coding fingers).

Figure 13: Inserting the Coding Fingers

3. Place the plug onto the I/O module.
Manual
Version 1.3.1
WAGO-I/O-SYSTEM 750
753-461 2AI Pt 100/RTD