753-646 KNX/EIB/TP1 Module
Figure 17: Attachment of Cable Binders
6.3.1
Coding
Coding using small plastic pins and sockets facilitates mating of the I/O module
with the appropriate plug.
1.
Insert the pin into the socket.
Figure 18: Assembling the Coding Fingers
2.
Position the assembled coding fingers in the I/O module. Due to its design,
each coding finger allows 4 different coding options (i.e.; 16 different
options using 2 coding fingers).
Figure 19: Inserting the Coding Fingers
3.
Place the plug onto the I/O module.
Mounting
39
Manual
Version 1.1.0