Coding; Figure 12: Attachment Of Cable Binders; Figure 13: Assembling The Coding Fingers; Figure 14: Inserting The Coding Fingers - WAGO I/O System 750 Manual
2do 24v dc 0.5a/ diagnostics 2-channel digital output; 24 v dc; short-circuit protected; high-side switching; with diagnostics
Hide thumbs
Also See for I/O System 750:
- Manual (468 pages) ,
- Quickstart reference (54 pages) ,
- Quick start manual (18 pages)
Table of Contents
Advertisement
WAGO I/O System 750
753-506 2DO 24V DC 0.5A/ diagnostics
Figure 12: Attachment of Cable Binders
5.3.1
Coding
Coding using small plastic pins and sockets facilitates mating of the I/O module
with the appropriate plug.
1.
Insert the pin into the socket.
Figure 13: Assembling the Coding Fingers
2.
Position the assembled coding fingers in the I/O module. Due to its design,
each coding finger allows 4 different coding options (i.e.; 16 different
options using 2 coding fingers).
Figure 14: Inserting the Coding Fingers
3.
Place the plug onto the I/O module.
Public
Mounting
33
Manual
Version 1.3.1
Advertisement
Table of Contents
