Coding; Figure 12: Attachment Of Cable Binders; Figure 13: Assembling The Coding Fingers; Figure 14: Inserting The Coding Fingers - WAGO 753-482 Manual

42 Mounting

Figure 12: Attachment of Cable Binders

5.3.1

Coding

Coding using small plastic pins and sockets facilitates mating of the I/O module
with the appropriate plug.
1. Insert the pin into the socket.

Figure 13: Assembling the Coding Fingers

2. Position the assembled coding fingers in the I/O module. Due to its design,
each coding finger allows 4 different coding options (i.e.; 16 different
options using 2 coding fingers).

Figure 14: Inserting the Coding Fingers

3. Place the plug onto the I/O module.
Manual
Version 1.2.0
WAGO I/O System 750
753-482 2AI 4-20mA 12 Bit S.E. HART