Safety Notes; Preconditions For Use - Siemens SITRANS TDL Compact Operating Instructions

Safety notes

3.1

Preconditions for use

This device left the factory in good working condition. In order to maintain this status and to
ensure safe operation of the device, observe these instructions and all the specifications
relevant to safety.
Observe the information and symbols on the device. Do not remove any information or
symbols from the device. Always keep the information and symbols in a completely legible
state.
Symbol
Observe the test certification, provisions and laws applicable in your country during
connection, assembly and operation. These include, for example:
• National Electrical Code (NEC - NFPA 70) (USA)
• Canadian Electrical Code (CEC Part I) (Canada)
8
Explanation
Consult operating instructions
Hot surface
Dangerous electrical voltage
Isolate the device from power using a circuit-breaker
Protect the device from impact otherwise loss of degree of protection
Protective insulation; device in protection class II
Compact Operating Instructions, 05\2023, A5E51659183-AA – revised 03/2024
3
SITRANS TDL