Specifying The Motor Speed Via The Fieldbus - Siemens Sinamics G120 CU240E Operating Instructions Manual

Using BICO technology, you can also assign the JOG function to other keys.
Parameter
P0003 = 3
P1055 = ...
P1056 = ...
5.4.6

Specifying the motor speed via the fieldbus

Specifying the motor speed via the fieldbus
To specify the speed of the motor via the fieldbus, the inverter must be connected to a
higher-level controller via a PC tool. For more information, see "Operation in fieldbus
systems".
Frequency inverter
Operating Instructions, 08.10. 2008, t.b.d.
Description
User access level
3: Expert mode
Enable JOG CW
Possible sources: 722.x (digital inputs) / 19.8 (JOG key on the Operator Panel) /
r2090.8 (serial interface)
Enable JOG CCW
Possible sources: 722.x (digital inputs) / 19.8 (JOG key on the Operator Panel) /
r2090.9 (serial interface)
Functions
5.4 Setpoint sources
101