Mounting The Motor - Siemens SINAMICS V60 Getting Started

CAUTION
Shielding layer
Make sure that the clamp for fixing the shielded power cable is in close contact with the shielding layer of the cable.
Note
After the installation, it is recommended that the screws on the terminal covers should be screwed down to ensure the
safety.
Siemens does not provide the shielded power cable. Please prepare the shielded power cable by yourselves for CE
certification.
2.1.2

Mounting the motor

Motor mounting dimensions
14
Controlled Power Module (CPM60.1)
A5E03975175-002, 04/2014