Preparing Sigmawin; Connecting A Pc With Sigmawin; Sigmawin - YASKAWA E-V Series User Manual

2 SigmaWin+

2.1
SigmaWin+
SigmaWin+ is a software application that can be used to view SERVOPACK status, set parameters, and per-
form setup tuning.
2.2

Preparing SigmaWin+

Install SigmaWin+ after downloading the software application from the following Yaskawa website.
http://www.e-mechatronics.com.
2.3

Connecting a PC with SigmaWin+

A PC with SigmaWin+ installed can be connected to SERVOPACKs by one of two methods.
Connection Method
Conventional
With a Controller
For more information on how to connect a PC with SigmaWin+, refer to the SigmaWin+ Online Manual. To
view the online manual, use the following procedure.
1.
Turn on the computer.
2.
Double click YE_Applications icon.
3.
Double click MANUAL icon.
4.
Double click SigmaWin+ English Edition Online Manual.
2-2
Use a communications cable to connect one PC with SigmaWin+ installed
to one SERVOPACK.
To use SigmaWin+ with a different SERVOPACK, disconnect the cable
and reconnect the PC to the other SERVOPACK.
Use a communications cable to connect one PC with SigmaWin+ installed
to one controller and then connect the controller to one SERVOPACK.
If using this method, several SERVOPACKs can be connected to the con-
troller at the same time.
Description