5 Adjustments
5.5.2 One-parameter Tuning Procedure
9.
Change the tuning level by clicking the setting arrows. Continue to raise the level until an
overshoot occurs.
Note: The set feedforward level will not be applied until the Positioning Completion signal (/COIN) is output.
The notch filter/anti-resonance control auto setting function, the anti-resonance control adjustment func-
tion, or autotuning with reference input can be used as required.
See
To reset to the original settings and status, click Back.
10.
When tuning is complete, click Completed to return to the main window.
The settings will be written in the SERVOPACK.
5-48
Functions To Suppress Vibration for details.
MECHA