YASKAWA E-V Series User Manual page 135

Next
The Next button is available if the data is transferred successfully. If an error occurs or if the transmis-
sion is interrupted, it is unavailable and cannot be selected.
Click Next to view the Operation/Measurement box.
Cancel
Click Cancel to stop processing and return to the main window.
5.
Click Start to transfer the reference conditions to the SERVOPACK.
6.
Click Next.
The following window will appear.
7.
Click Servo On.
8.
Click Forward to take measurements by turning (moving) the motor forward.
After the measurements and the data transmission are finished, the following window will appear.
9.
Click Reverse to take measurements by turning (moving) the motor in reverse.
After the measurements and the data transmission are finished, the following window will appear.
5.3 Advanced Autotuning (Fn201)
MECHA
MECHA
MECHA
5
5-25