4.
For the zero digit, select 2: Outputs the signal from CN1-10 output terminal in the
Positioning Completion Signal Mapping (/COIN) list.
5.
Click OK.
The Edit box will close, and the Parameter Editing dialog box will appear again.
6.
Click Write.
The following window will appear after the new parameter setting has been saved in the SERVOPACK.
7.
Click OK.
8.
To enable the change in the setting, restart the SERVOPACK.
MEC
HA
MEC
HA
3.3 I/O Signal Allocations
3
3-19