YASKAWA E-V Series User Manual page 204

Click OK and then change the setting of the Fn010 to allow writing.
For details on how to change the setting, refer to 6.12 Write Prohibited Setting (Fn010).
2.
Click OK.
The JOG Operation box will appear.
If the power to the servomotor is on, an error message will appear. Make sure that the power to the servo-
motor is off.
3.
Click Servo ON.
The JOG Operation box will appear.
4.
Press the Forward or Reverse and hold it down. A JOG operation is performed at the speed
set at step 2 only while one of the buttons is pressed.
5.
After the JOG operation has been successfully completed, restart the SERVOPACK.
6.3 JOG Operation (Fn002)
The speed set in Pn304 will be shown. Click Edit if
you want to change the speed.
On the left side of the Operation group, the color of
the button and the text in the box changes to indicate
if the power to the servomotor is on or off. The name
of the square button will change to reflect the current
status of the servomotor's power. When the power to
the servomotor is off, the square button is labeled
Servo ON. When the power to the servomotor is on, it
is labeled Servo OFF.
MECHA
MECHA
6
6-5