2.
Click Continue.
The Multi-Turn Limit Setting box will appear.
3.
Change the setting to the desired number of revolutions.
4.
To save the settings, click Writing into the Servopack.
A warning message will appear.
5.
Click OK and the settings are changed to the new ones.
6.
Restart the SERVOPACK.
Because only the settings for the SERVOPACK were made, the settings for the servomotor are still
incomplete and an alarm occurs.
4.7 Absolute Encoders
MEC
HA
MEC
HA
MEC
HA
4
4-37