4 Operation
4.7.6 Multiturn Limit Disagreement Alarm (A.CC0)
7.
Return to the SigmaWin+ main window. To make the settings for the servomotor, click Setup –
Multi-Turn Limit Setting again.
A verification message will appear confirming if you want to continue although the position data will
change.
8.
Click Continue.
The Multi-Turn Limit Setting box will appear. To change the settings, click Re-Change.
9.
To save the settings, click Writing into the Motor.
A warning message will appear.
10.
Click OK.
4-38
MEC
HA
MEC
HA
MEC
HA