Installing A Braking Module In A Power Module, Frame Size Fx - Siemens S120 Manual

Hide thumbs Also See for S120:

Table of Contents

Installing a Braking Module in a Power Module, frame size FX

Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4

Loosen the two M6 screws.

Remove the front cover to the top.

Loosen the two screws from the cover plate at the top

and the M6 nut on the left-hand side.

Remove the cover plate at the left.

Loosen the four screws from the cover plate at the top

and the three securing screws at the rear.

Remove the cover plate at the top.

DC link components