Table of Contents
Advertisement
Changed Parameter Syntax and Semantics
8163A/B, 8164A/B & 8166A/B Mainframes Programming Guide
Table 13
on page -285 details commands whose parameter syntax or
semantics have changed.
Table 13
Commands with Different Parameters or Syntax
Command
SOUR:AM:FREQ/?
DISP:BRIG
SENS:CORR:COLL:ZERO?
SENS:POW:REF
SENS:POW:REF:STAT:RAT
SYST:DATe
GPIB Command Compatibility List
Change
This command does not accept the value CW, instead
use SOUR:AM:STAT ON|OFF to switch from and to CW
mode.
The commands accepts floating point values.
This command now supports integers between 1 and
100, instead of float values between 1 and 0.
This command returns the last zero state, instead of the
last remote zero state.
Accepts TOMODule and TOREF for the first parameter,
instead of accepting TOA|TOB as the HP 8153A does. The
numbers 0|1|2 cannot be used, only the strings above.
Accepts TOREF,0 or values for slot,channel, instead of
accepting TOA|TOB as the HP 8153A does. The numbers
have a different meaning.
SYST:DATe from HP 8167/8 is not supported, but
SYST:DATe from HP 8153 is supported.
8
Affects
8153
8153
8153
8153
8153
8167/8
285
Advertisement
Table of Contents
